HP Smart Storage Administrator User Manual
Page 99

Operations 99
Error code Error message
Comment or clarification
3046
This command is only available when
running offline
The operation requested cannot be performed
online. Boot to offline SSA Scripting and supply the
-offline parameter.
3047
Caching Volume parameters are not valid
for a data Volume
The parameters supplied are not applicable or valid.
3048
Invalid Spare Mode
—
3049
Encryption Login Failed
—
3050
Encryption Login command is not available —
3051
The Encryption command is not available
—
3052
The Zeroize command failed
The controller firmware returned an error when
attempting to set zeroize the encryption
configuration.
3053
The Firmware Lock/Unlock failed
The controller firmware returned an error when
attempting to lock or unlock the firmware.
3054
Unable to change the Key Manager Mode The controller firmware returned an error when
attempting to change the key manager mode.
3055
Unable to set the Key Encrypting Key
The controller firmware returned an error when
attempting to set Key Encrypting Key name.
3056
Unable to set the boot password
The controller firmware returned an error when
attempting to set the boot password.
3057
Unable to set the boot password state
The controller firmware returned an error when
attempting to set the boot password state.
3058
The controller does not support encryption An attempt was made to execute an encryption
command on a controller which does not support
encryption.
3059
Controller Encryption is disabled
An attempt was made to execute an encryption
command when encryption was disabled.
3060
Login required for this Encryption command A login is required before the encryption command
can be attempted.
3061
Plaintext volumes are not allowed
The option to create future plaintext volumes was not
selected when initially configuring the encryption
configuration.
3062
Rekey of the encrypted volume failed
The controller firmware returned an error when
attempting to rekey the selected logical volume.
3063
Plaintext to Ciphertext conversion of the
volume failed
The controller firmware returned an error when
attempting to convert the logical volume from
plaintext to ciphertext.
3064
Instant Secure Erase failed
The controller firmware returned an error when
attempting to perform an Instant Secure Erase
operation on the selected logical volume.
3065
Error changing the Controller Encryption
Mode
The controller firmware returned an error when
attempting to change the encryption mode (on/off).
3066
Error - you must indicate acceptance of the
End User License Agreement (EULA) using
ACCEPTEULA=YES
—
3067
Unable to set the password
An attempt to set the encryption password failed.
3068
Unable to set the Recovery question/answer An attempt to set the encryption recovery
question/answer pair failed.
3100
SSD Smart Path is not supported
—