HP Smart Storage Administrator - Manual (Page 75)

Operations 75
AllowPlainText= false
When creating volumes, you can set an additional volume option to determine whether the volume will be
encrypted or plaintext. You must first log in as the Crypto Officer user to use this feature. By default, volumes
are encrypted.
Action= Configure
Method= Custom
Controller= SLOT 1
EncryptionUser= crypto
EncryptionPassword= Password.12345
Array= A
Drives= 1
LogicalDrive= 1
RAID= 0
PlainText= Enable
This example converts an existing plaintext volume to cyphertext, without preserving data.
Action= Reconfigure
Method= Custom
Controller= SLOT 1
EncryptionUser= crypto
EncryptionPassword= Password.12345
Array= A
LogicalDrive= 1
Encode= DestroyData
Script file options
Options in HP SSA script files are divided into the following categories:
• Control category (on page 76 )
• Controller category (on page 77 )
• Array category (on page 80 )
• Logical Drive category (on page 83 )
Each category has several scripting options, but you do not always need to assign values to every option. HP
SSA can use default values in some instances, while in other instances, a listed option might not be relevant
for a particular configuration or scripting mode.
The options for each category are listed in the following table and described in more detail in the remainder
of this section.