HP Smart Storage Administrator - Manual (Page 73)

Operations 73
Sizeblocks = N
ShrinkSize = N
NumberOfParityGroups = N
NPG (same as NumberOfParityGroups)
Sectors = 32|63
StripSize = 8|16|32|64|128|256|512|1024
ArrayAccelerator = Enable|Disable
; Caching Logical Drive Options
CachingLogicalDrive = 1|2|3… max Volumes/2
RAID = 0|1 ;FW and Controller dependent
Size = N
Sample custom capture script
Running SSA Scripting in capture mode captures the configuration of all array controllers on the server in a
capture file. The capture file can be used in input mode with minor edits to replicate the configuration to other
array controllers.
Use of the "–internal" or "–external" command line switches effectively filters the controllers captured. For
example, if the "–external" switch is used, then any controllers internal to the host computer are not captured
in the output file.
Example:
; Date captured: Wed Jan 15 15:33:14 2014
; Version: 1:60:0:5
Action= Configure
Method= Custom
; Controller Specifications
; Controller HP Smart Array P800, Firmware Version 5.20
Controller= Slot 9
ReadCache= 25
WriteCache= 75
RebuildPriority= Medium
ExpandPriority= Medium
SurfaceScanDelay= 3
DriveWriteCache= Disabled
MNPDelay= 60
IRPEnable= Disabled
DPOEnable= Disabled
ElevatorSortEnable= Enabled
QueueDepth= Automatic
; Unassigned Drives
; 2E:2:1 (300 GB), 2E:2:8 (146 GB), 2E:2:9 (146 GB), 2E:2:10 (146 GB), 2E:2:11
(300 GB), 2E:2:12 (300 GB), 2E:2:13 (146 GB), 2E:2:14 (146 GB), 2E:2:15 (146 GB),
2E:2:16 (146 GB), 2E:2:17 (146 GB), 2E:2:18 (146 GB)
; Array Specifications
Array= A
; Array Drive Type is SAS
; 2E:1:1 (146 GB)