Encryptionuserpasswordset, Firmwarelock, Encryption logical volume category – HP Smart Storage Administrator User Manual
Page 90: Cryptoscramble, Encode, Encryptionrekeyvolume, Plaintext, Xml support, Xml output
Operations 90
EncryptionUserPasswordSet
This command sets the encryption password for the User role. The command value is the password.
FirmwareLock
This command toggles the array controller firmware through the values Lock and Unlock. Firmware must
be unlocked prior being updated.
Encryption logical volume category
The following commands have been added to HP SSA Scripting versions 1.60.0.0 and later to support data
encryption features introduced with select Gen8+ controllers.
CryptoScramble
This command performs an instant cryptographic erase on the current logical volume. All user data is lost
upon entering the command value Yes.
Encode
This command converts a plaintext logical volume to an encrypted volume, optionally converting the existing
data or destroying it. The command values are PreserveData or DestroyData.
If PreserveData is entered, a volume transformation occurs.
EncryptionRekeyVolume
This command rekeys the logical volume when the value Yes is entered. This results in a volume
transformation.
Plaintext
This command specifies whether to create a new logical volume in either plaintext or encrypted form. To
create a plaintext volume when encryption is enabled, the AllowPlainText option must have been set
during initial configuration of the array controller. The command values are Enable or Disable, in reference
to whether encrypted forms are enabled. The default form is encrypted, or enabled.
XML support
HP SSA scripting supports an XML file format for input and output.
XML output
To create an XML output document, use an XML suffix with the output file name:
C:\hpssascripting -c out.xml
The following text is an example XML output file.