HP Smart Storage Administrator - Manual (Page 24)

Operations 24
Item Tasks
Unused space Create Logical Drive
More Information
Physical drive Erase Drive**
View Status Alerts
Unassigned
drives Create Array
More Information
*This task is not available on all controller models.
**If performed with an HP Smart Array G6 or G7 controller, this task requires a registered SAAP license key or a
controller where SAAP functionality is standard. See "About SAAP (on page
121 )."
†If performed with a Gen8 controller, this task requires a registered HP SmartCache license key.
Configuring a controller
1. Open HP SSA.
For more information, see "Using the HP SSA GUI (on page
16 )."
2. Open the Configure panel by doing one of the following:
o Choose a device and click Configure in the quick navigation menu.
o Select an available device from the Home screen, and then click Configure under the available
options.
The Configure panel appears.
IMPORTANT: Screens may have different options available, depending on the server
configuration.
3. Configure the controller. See "Performing a Configuration task (on page 25 )."
4. When prompted, save the configuration.