HP 8.20q Fibre Channel Switch - Manual (Page 91)

HP StorageWorks Simple SAN Connection Manager user guide 91
In the Logical Disk Server Presentation dialog box, it shows “Unknown Server.” What does this mean?
Symptoms: An Unknown Server may appear if:
• The logical disk in the storage subsystem is assigned to an HBA, but the application
cannot discover that HBA in any of the servers.
• The server is offline.
• The HBA is from a vendor other than HP.
• You made specific changes to an HBA (for example, changing the type).
In the Logical Disk Server Presentation dialog box, you may then be unable to deny
access to that HBA or server (that is, you cannot remove it from the “allowed” list). This
behavior occurs because the removed HBA remains saved by the array. To permanently
remove this type of HBA, you must use an array utility:
• For EVA storage, use EVA Command View.
• For MSA storage, use ACU (Array Configuration Utility).
Solution: Ensure that the server is online and that the HBA is from HP and not from another
vendor. To permanently remove the HBA, use an array utility as described in the
previous paragraph.