HP 8.20q Fibre Channel Switch - Manual (Page 44)

44 Managing switches
• On the HBA & Switch Management menu, click Get Switch Properties. If there is only one switch,
the switch is automatically selected; continue with step 3 . If there is more than one switch, the Switch
Selection dialog box opens; continue with step 2 .
• On the content pane’s Physical Connection map, right-click the switch icon, and on the shortcut
menu, click Get Switch Properties.
2. If the Switch Selection dialog box opens, select the switch you want to view.
3. When you finish viewing the switch properties, click OK to close the dialog box.
Viewing switch zoning information
The Switch Zoning Information dialog box provides facts about the current switch zoning setup. This
information is read-only; you cannot make changes on this dialog box.
To view switch zoning information:
1. On the HBA & Switch Management menu, click Get Switch Zoning Information.
The Switch Zoning Information dialog box (
Figure 27 ) opens.
Figure 27 Switch Zoning Information dialog box
This dialog box shows the following current information about your switch:
• Zone List—Lists all zones and the members of each. The currently active zone is shown in a darker
color.
• Switch Name (Port #)—Shows the switch name and, in parentheses, its port number.
• Port Type—Shows the type of port; for example, HBA or RAID storage.
• Vendor—Manufacturer name; for example, Hewlett Packard.
2. When you finish viewing the switch zoning information, click OK to close the dialog box.