HP 8.20q Fibre Channel Switch - Manual (Page 38)

38 Viewing maps, events, and configurations
• Storage subsystem
• Storage subsystem controllers
• Storage subsystem controller’s ports
NOTE: The information presented is read-only. You can right-click any of the icons representing
switches, HBAs, servers, and subsystems to open a shortcut menu for that component.
How to view a Physical Connection map
To view a physical connection map:
1. In the navigation pane, click on the root of the navigation pane:
• If the navigation pane displays the Storage Subsystem - Logical Disk View, the root is called
Subsystem - Logical Disk.
• If the navigation pane displays the Server - Storage View, the root is called Server - Logical Disk.
2. The content pane shows a topology map. If the map displayed is LUN Assignment map, click the
Physical Connection Map tab to bring that map forward.
Viewing a LUN Assignment map
Simple SAN Connection Manager provides a graphical representation for the access to logical disks from
the HBAs and servers within the SAN. This graphical representation is the LUN Assignment map shown in
the content pane (see Figure 23 ).
Description of a LUN Assignment map
The LUN Assignment map ( Figure 23 ) shows the actual access link between the HBAs and servers to the
subsystems’ logical disks. The blue lines indicate that the HBAs or servers are allowed to have access to
the logical disk.
Figure 23 LUN Assignment map
The map shows the following components:
• Storage subsystem
• LUNs
• Servers (Click the server name or icon to show or hide the HBAs from the topology map.)
• HBAs
NOTE: The information presented is read-only. You can right-click any of the icons representing the
subsystem, LUNs, HBAs, and servers to open the shortcut menu for that component.