HP 8.20q Fibre Channel Switch - Manual (Page 20)

20 Installing and removing Simple SAN Connection Manager
Or, if any software components fail to install, the final installation window ( Figure 10 ) lists those
components.
Figure 10 Installation wizard: finished with errors
9. Click the View Error Log link to open an error log that provides additional information. You may be
prompted to upgrade, add, or modify components for successful installation.
10. Remove the Simple SAN Connection Manager CD, and then click Reboot.
11. Restart your computer to complete the installation process.
12. When you restart your computer, the system may report finding new hardware. If so, respond to these
messages by clicking Cancel.
Repeat this procedure to install the software on additional Windows servers.
Linux installation
Follow these steps to install the required software on servers running Linux.
To install the components required by Simple SAN Connection Manager on Linux:
1. Insert the installation CD into the CD-ROM drive of the server.
The installation CD should mount automatically in one of the following locations:
/media/cdrom/
/mnt/cdrom/
/media/cdrecorder/
If the installation CD is not mounted automatically, issue the following commands to mount the CD:
# mkdir -p /mnt/cdrom
# mount /dev/cdrom /mnt/cdrom