HP 8.20q Fibre Channel Switch - Manual (Page 39)

HP StorageWorks Simple SAN Connection Manager user guide 39
How to view a LUN Assignment map
To view a LUN Assignment map:
1. In the navigation pane, click on the root of the navigation pane:
• If the navigation pane displays the Storage Subsystem - Logical Disk View, the root is called
Subsystem - Logical Disk.
• If the navigation pane displays the Server - Storage View, the root is called Server - Logical Disk.
2. The content pane opens a topology map. If the map shown is Physical Connection map, click the LUN
Assignment Map tab to bring that map forward.
Viewing the event log
The event log displays a list of all Simple SAN Connection Manager-initiated actions and the results for the
host, HBAs, switches, and storage subsystem arrays. The event log begins recording when Simple SAN
Connection Manager is running. Event log entries are formatted by severity, time stamp, type, category,
source, event ID, server, and description. The log holds a maximum of 1,999 entries. Once the maximum is
reached, the event list wraps, and the oldest events are discarded and replaced with the new events.
The color of the entry in the log indicates its severity:
• Red indicates an error condition.
• Yellow indicates a warning condition.
• White indicates information only.
To view the event log:
• On the File menu, click Event Log.
The Application Event Log dialog box (
Figure 24 ) opens.
Figure 24 Application Event Log dialog box
To clear the entire event log:
• On the bottom of the Application Event Log dialog box, click the Clear Logs button. The event log is
emptied and ready for more entries.