HP 8.20q Fibre Channel Switch - Manual (Page 50)

50 Managing switches
NOTE: If the switch name and current firmware version shown are not correct, try to get the switch
properties first. For details, see Viewing switch properties on page 43.
4. Click Select Switch Firmware File.
5. Navigate to the folder containing the required file for the switch, select the firmware file, and then click
Open.
The Updated FW Image File column shows the file name.
6. Click Switch Admin Password.
The Switch User Name and Password for Firmware Update dialog box (
Figure 33 ) opens.
Figure 33 Switch User Name and Password for Firmware Update dialog box
7. In this dialog box, complete these steps:
a. Enter the user name and password.
b. (Optional) If you want the firmware update to take affect immediately, rather than after the switch
power is recycled, select the Apply the new firmware image immediately after successful update
check box.
c. Click OK.
8. Repeat steps 4 through 7 for each switch you want to update, and then continue with step 9 .