HP 8.20q Fibre Channel Switch - Manual (Page 78)

78 Managing servers
• Bus Type
• Rebuild Priority
• LUNs Active Controller(s)
• LUN Flags
Managing the server list
Simple SAN Connection Manager provides server list management with the ability to quickly refresh the
server list comprising your SAN. When you refresh the server list, the most current topology of your SAN is
shown in the Physical Connection and LUN Assignment maps. Use the Server List Management dialog box
to update the server list and to add and remove servers.
NOTE: Simple SAN Connection Manager discovers only servers connected to the first IP domain on the
host, and it discovers only servers on the same subnet. If you have multiple IP addresses belonging to
different subnets, it discovers servers only on the first subnet. Multiple domains are not currently supported.
To change the order of servers, use the Windows network connections settings for advanced TCP/IP (for
assistance, refer to your Windows documentation).
To manage servers:
1. On the Advanced Operations menu, click Manage the Server List.
The Server List Management dialog box (
Figure 60 ) opens.
Figure 60 Server List Management dialog box
2. The Server List Management dialog box contains the following areas:
Current Servers area:
• Current Servers lists the servers currently online and part of this SAN. To change the contents of
this list, use the buttons and check boxes on this dialog box.
• The Discover only servers on the Current Server list check box controls the broadcast for servers.
Select this check box to allow only the servers listed under Current Servers to be discovered and