HP NonStop G-Series - Manual (Page 44)

[AutomaticStartup] Section
Workstation Configuration
2–16 110838 Tandem Computers Incorporated
Example
UseRscSecurity=1 (Prompt for a User ID and password.)
RscIniFile
Enter the name of the file containing the RSC configuration options. These options are
described in the RSC documentation listed in the preface.
Default
RscIniFile=RSC.INI
If only a file name and extension (no directory) is specified, then the following
search path is used:
The current directory in effect when the Tandem DDE Gateway was started.
The root directory of the C: drive (C:\).
The root directory of the A: drive (A:\).
Example
RscIniFile=C:\COMM\LAN.INI
RscIniSection
Enter the section name to be accessed within the file that you specified using the
RscIniFile option. Enter up to 30 alphanumeric and hyphen characters starting with a
letter for this configuration option. Do not enter square brackets around the section
name.
Default
RscIniSection=RSC
Example
RscIniSection=NETBIOS
[AutomaticStartup] Section You can configure data communications connections to be automatically started
whenever you start the Tandem DDE Gateway. If connections are automatically
started, then you do not have to remember to start them when you start the Tandem
DDE Gateway. Also, if your client applications get no response to a DDE Initiate
function, then they can programmatically start the Tandem DDE Gateway and you
will not need to make the data communications connections manually.
Note Connections are always automatically shut down when you exit from the Tandem DDE Gateway.