HP Color LaserJet 9500 Printer series - Manual (Page 35)

ENWW Features for users 33
3
If the connection is interrupted before your print job is complete, the optional HP Fast InfraRed Receiver status indicator
turns off. You have up to 40 seconds to correct the interruption and continue the job. If the connection is resumed within this
time, the status indicator lights up again.
Note The connection is permanently broken if the sending port is moved out of operation range or if anything
passing between the ports blocks transmission for more than 40 seconds. (This block could be a hand, paper,
or even direct sunlight). Depending on the size of the job, printing with the optional HP Fast Infrared Receiver
may be slower than printing with a cable connected directly to the parallel port.
Interrupting and resuming printing
The job interrupt and resume feature lets you temporarily stop the job that is currently printing in order to print another job
through an FIR connection. When the FIR job is finished printing, the interrupted job resumes printing.
To interrupt the job at the printer, connect to the FIR port on the printer and send a job to the printer. The printer stops
printing the current job when it reaches the end of the copy it is printing. The printer then prints the job sent over the FIR
connection. When the printer is done printing that job, it resumes printing the original job with multiple copies where it left
off.