HP Color LaserJet 9500 Printer series User Manual
Page 146
144 Chapter 6 – Solving problems
Rev. 1.0
CHECKING PAPER
PATH
The engine is rotating its rollers to check
for possible jams and to clear them
automatically.
No action necessary.
CHECKING PRINTER
The engine is performing an internal test.
No action necessary.
CHOSEN PERSONALITY NOT
AVAILABLE
alternates with
READY
A print job requested a printer language
(personality) that is not available with this
printer. The job will not print and will be
cleared from memory.
Print the job using a printer driver for a
different printer language, or add the
requested language to the printer (if
available).
CLEAN POST CHARGER
The post charger requires cleaning.
Clean the post charger. (See “Cleaning
the post charger” on page 63.)
CLEARING PAPER PATH
The printer jammed or the printer was
turned on and media was detected in a
wrong location. The printer is
automatically attempting to eject the
pages.
No action necessary.
CLOSE FRONT OR LEFT DOOR
The front or left doors are open.
Close the doors to continue printing.
CLOSE LOWER RIGHT DOOR
The lower right door is open.
Close the lower right door to continue
printing.
DETECTABLE SIZE
IN TRAY X
RECOMMEND MOVE
SWITCH TO STANDARD
A tray is loaded with standard size media,
and the switch in the tray is set to custom.
Move the switch to the "standard"
position.
Confirm that the media guides are
resting against the media.
Message
Description or explanation
Recommended action