HP Color LaserJet 9500 Printer series - Manual (Page 198)

http://www.hp.com/support/lj9500
196 Chapter 7 – Supplies Rev. 1.0
25 Pinch the release tab on the left roller and pull the roller off of the rod.
Remove the roller on the right side. Slide the blue cover to the left, and then
remove the bottom roller.
26 Grasp both sides of the new bottom roller and slide it onto the rod until it
clicks into place. Install the roller on the right side, and then install the left
roller. Slide the blue cover to the right.
27 Align tray 4 with the rails inside the printer. Lift the tray slightly and slide it
partially into the printer. Replace the media, making sure that the guides fit
snugly against the media. Slide the tray in completely.
25
26
27