HP Color LaserJet 9500 Printer series - Manual (Page 205)

ENWW Installing supplies 203
7
Replacing the image cleaning kit
Use this procedure to install the image cleaning kit.
1 Replace the cleaning kit when REPLACE CLEANING KIT appears on the
control panel display. The gauge for the used cleaning kit blinks.
2 Remove the new parts from the packaging and save the packaging. If an
output device is installed on the left side of the printer, pull it away from the
printer.
3 On the left side of the printer, use the blue tab on the rear edge of the printer
to pull the filter out of the slot.
1
2
3