HP Color LaserJet 9500 Printer series - Manual (Page 209)

ENWW Installing supplies 207
7
13 Reattach any output device that you removed.
14 Do one of the following:
If NEW CLEANING KIT appears on the control panel display, use and
to scroll to YES , and then press . The kit life count is automatically reset.
If NEW CLEANING KIT does not appear, press to open the menus. Use
and to scroll to CONFIGURE DEVICE , then RESETS , and then RESET
SUPPLIES . Scroll to NEW CLEANING KIT , and then select YES to reset the
count.
Note
If you select NO or do not make a selection, and the cleaning kit is at
maximum life, the printer remains offline until you replace the kit and select
YES .
13
14