HP Color LaserJet 9500 Printer series User Manual
Page 168
166 Chapter 6 – Solving problems
Rev. 1.0
64
PRINTER ERROR
alternates with
TO CONTINUE CYCLE POWER
A scan buffer error occurred.
Turn the printer off, and then turn the
printer on.
If this message persists, contact an
HP-authorized service or support
provider. (See “Customer support
options worldwide” on page 214, or go
to
.)
68.X PERMANENT STORAGE ERROR
alternates with
TO CONTINUE PRESS
An error occurred in the printer nonvolatile
memory (NVRAM), and one or more
printer settings have been reset to the
factory default.
Printing can continue, but some
unexpected functions might occur
because an error occurred in permanent
storage.
Pressing
should clear the
message.
If this message persists, contact an
HP-authorized service or support
provider. (See “Customer support
options worldwide” on page 214, or go
to
.)
68.X PERMANENT STORAGE FULL
alternates with
TO CONTINUE PRESS
The printer NVRAM is full. Some settings
that were saved in the NVRAM might have
been reset to the factory defaults.
Printing can continue, but some
unexpected functions might occur
because an error occurred in permanent
storage.
Pressing
should clear the
message.
If this message persists, contact an
HP-authorized service or support
provider. (See “Customer support
options worldwide” on page 214, or go
to
.)
Message
Description or explanation
Recommended action