HP Color LaserJet 9500 Printer series - Manual (Page 195)

ENWW Installing supplies 193
7
16 Remove the new tray rollers from their packaging. Avoid touching the
rubber surface of the rollers.
Note
Replace all of the rollers in a tray at the same time.
17 Pull tray 2 out of the printer until it stops. Lift it up slightly and pull it out.
Remove tray 3, noting which tray belongs in which position.
Note
Do not move the blue switch at the left rear of the tray. It is not necessary to
unload the paper from the tray.
18 In tray 3, locate the small roller and two large rollers to the right inside the
opening.
16
17
18