HP Color LaserJet 9500 Printer series - Manual (Page 196)

http://www.hp.com/support/lj9500
194 Chapter 7 – Supplies Rev. 1.0
19 Pinch the plastic tab on the end of each roller to remove the roller. Remove
all three rollers.
20 Grasp each new roller by both sides and slide it onto the corresponding rod
until the roller clicks into place. Replace the tray-2 rollers using steps 18
through 20.
Note
Make sure that the small roller is to the left in both trays.
21 Align tray 2 with the rails inside the printer, and then slide the tray into the
printer. Align tray 3 with the rails inside the printer, and then slide the tray
into the printer.
19
20
21