HP Color LaserJet 9500 Printer series User Manual
Page 148
146 Chapter 6 – Solving problems
Rev. 1.0
EIO DISK X
NOT FUNCTIONAL
The EIO hard disk is not working correctly. Turn off the printer.
Remove the EIO hard disk from the
indicated slot (a slot number will
replace the X).
Reinstall the EIO hard disk.
Turn on the printer.
If the message continues, replace the
disk with a new EIO hard disk.
EIO DISK X
SPINNING UP
The EIO hard disk in slot
X
is spinning up
its platter.
No action necessary.
EVENT LOG EMPTY
The user is attempting to view an empty
event log by selecting
SHOW EVENT LOG
at
the control panel.
Perform a different action.
FLASH DEVICE
FAILURE
alternates with
READY
The flash DIMM had a critical failure and
can no longer be used.
Remove the flash DIMM and replace it
with a new one.
FLASH FILE OPERATION FAILED
alternates with
READY
The requested operation could not be
performed. You might have attempted an
illegal operation, such as trying to
download a file to a nonexistent directory.
Check the file name and try again.
Message
Description or explanation
Recommended action