HP Color LaserJet 9500 Printer series - Manual (Page 203)

ENWW Installing supplies 201
7
10 Close the left door. Reattach any output device that you removed.
Note
If the door does not close, make sure that the blue fuser levers are in the
vertical position.
11 If NEW FUSER KIT appears on the control panel display, use and to
scroll to YES , and then press . The kit life-count is automatically reset.
12 If NEW FUSER KIT does not appear, press to open the menus. Use
and to select CONFIGURE DEVICE , then to select RESETS , and then to
select RESET SUPPLIES . Scroll to NEW FUSER KIT , and then select YES to
reset the count.
10
11
12