HP Color LaserJet 9500 Printer series - Manual (Page 199)

ENWW Installing supplies 197
7
28 If NEW TRANSFER KIT appears on the control panel display, use and
to scroll to YES , and then press . The kit life-count is automatically reset.
29 If NEW TRANSFER KIT does not appear, press to open the menus. Use
and to scroll to CONFIGURE DEVICE , then to RESETS , and then to RESET
SUPPLIES . Scroll to NEW TRANSFER KIT , and then select YES to reset the
count.
Note
If you select NO or do not make a selection, the printer remains offline until
you replace the kit and select YES .
30 Place the used parts in the packaging from the new ones. For recycling
information, see the recycling guide that is included with the new image
transfer kit.
28
29
30