HP Identity Driven Manager Software Series - Manual (Page 24)

2-4
Getting Started
Before You Begin
Figure 2-2. Server Information
For the Agent to communicate with the PCM server, these values MUST MATCH
the values set on the PCM server for this Agent.
a. If the Agent will initiate connection to the PCM server, check the Agent
Initiates Connection check box. If the PCM server will initiate a connection to
the Agent, ensure this check box is unchecked.
All Agent that initiate connection to the PCM server must use the same port
number and encryption type as configured in the Agent Manager Server Setup
tab.
b. To change the default Port that the Agent will use to communicate with the
PCM server, uncheck the related Use Default check box and type the desired
port. The default PCM server port is 51111, which can be changed to any
unused port during PCM server installation or at the PCM server.
c. If you do not want to encrypt data sent to the PCM server, uncheck the related
Use Default check box and select Plain Text from the Encryption drop-down list.
The default encryption method is SSL. If the PCM server is behind a firewall,
we recommend using SSL encryption.
d. In the IP Address field, type the IP address of the PCM server if the Agent is
initiating the connection to the PCM server.
e. To change the default Password that the Agent will use to communicate with
the PCM server, uncheck the related Use Default check box and type the
desired port (any number of alphanumeric characters). The default pass-
word is “procurve”. This must match the password set on the Agent Manager
Server Setup tab.