HP Identity Driven Manager Software Series - Manual (Page 94)

3-26
Using Identity Driven Manager
Configuring Access Profiles
4. If you want the IDM QoS attributes to override the switch attributes, use
the
QoS drop-down list to select the quality of service or priority for
outbound traffic of users in groups associated with the access profile. QoS
ranges from lowest to highest, with Normal being the default.
5. In the Ingress rate-limit field, click the drop-down arrow and select the
maximum bandwidth or rate limit allocated for traffic from users assigned
to the Access Policy Group using the Access Profile. The default setting
is 1000 Kbps (1 Mbps), which is translated to a percentage of bandwidth
at the switch.
6. In the Egress rate-limit field, click the drop-down arrow and select the
maximum bandwidth or rate limit allocated for traffic to users assigned
to the Access Policy Group using the Access Profile. The default setting
is 1000 Kbps (1 Mbps), which is translated to a percentage of bandwidth
at the switch.
7. To assign the Network Resources, click Edit... This launches the Network
Resource Assignment Wizard.
Figure 3-17. Network Resource Assignment Wizard
8. Click Next to continue to the Allowed Network Resources window.