HP Identity Driven Manager Software Series User Manual

Page 118

3-50

Using Identity Driven Manager
Adding RADIUS Clients

Selecting a single NAC800 Enforcement Server in a Management Server
deploys the RADIUS settings to all Enforcement Servers associated with
the Management Server.

Select the ProCurve switches to be configured as RADIUS clients on the
selected RADIUS servers.

Figure 3-36. Add RADIUS Client Wizard, Device Selection

Use the drop-down list above the

Available Devices list to display the

devices by model.

In the

Available Devices list, select the IP addresses of the ProCurve

switches that will be added as RADIUS clients.

This list displays all discovered ProCurve switches and their addi-
tional network interfaces (treated as manually added client). Sort the
devices by IP address or Model by clicking the column heading.

Click the

>> button to move the selected switches to the Selected

Devices list.

To add a manually added client, type the IP address of the switch in
the

IP Address field on the right and click Add.

When all switches that you want to add as RADIUS clients are shown
in the

Selected Devices list, click Next.

This manual is related to the following products:

Identity Driven Manager Software Licenses