HP Identity Driven Manager Software Series - Manual (Page 164)

4-20
Using the Secure Access Wizard
Using Secure Access Wizard
If not using the same shared secret on all the devices, enter the Radius
shared secret for each device in the list. Use the scroll bar as needed to
move down the list. You will not be able to continue until the RADIUS
shared secret is set for each device in the list.
28. When you have entered the RADIUS shared secret, click Next to select the
devices that will be added to each of the previously selected RADIUS
servers as RADIUS clients.
29. To add all devices as clients to the displayed RADIUS server, click Select
All.
30. To unselect all devices, click Unselect All.
31. To add specific devices as clients to the RADIUS server listed in the Target
RADIUS Server column, check the check box next to the device.
32. To display additional error information about a device with an error icon,
mouse over the error icon.
33. Click Next to validate your entries and continue to the Save Settings
(selection) window.
Figure 4-16. Secure Access Wizard, Save Settings selection
34. Click the link to Save settings..., or Save as template..., and launch the Save
Settings dialog to provide a name for the saved settings file.