HP Identity Driven Manager Software Series - Manual (Page 173)

5-5
Troubleshooting IDM
IDM Events
The Pause will toggle to the "Resume" icon. Click the resume button to restart
the events display. The button will toggle back to the Pause icon.
Using Event Filters
The events shown in the Events tab view can be filtered to show only specific
events based on the device that generated the event, severity, dates and times
of occurrence, or description.
Click the Filtering icon to display or hide the Filters at the top of the Events
tab. You can use any single parameter, or a combination of parameters.
Figure 5-3. Events Filter
1. To create a filter:
a. Check a check box to activate a field. Multiple fields can be activated.
b. Select each type of information you want to display. For example, if
you checked the
Acknowledged check box and selected Unacknowl-
edged from the filtering pane of the Events tab, events that have been
acknowledged will be excluded from the display.
c. Click Apply to filter the display.
d. To save the filter, click Save, type the name that will be used to identify
the filter, and click OK. The filter is added to the Load drop-down list
on the Events tab, and the filter can then be activated by selecting it
from the
Load drop-down list.
2. To activate a saved filter:
a. If the Filtering pane is not displayed, click the + next to Filtering.
b. Click Load.
c. Select the desired filter from the drop-down list. This activates the
filter and displays only events meeting the selected filter criteria.