HP Identity Driven Manager Software Series - Manual (Page 182)

A-2
Using ProCurve Network Access Controller with IDM
About ProCurve Network Access Controller 800
Before You Begin
For information on installing the ProCurve NAC appliance, please refer to the
ProCurve Network Access Controller 800 Hardware Install Guide
, and/or the
information provided with your "ProCurve Network Access Controller End-
point Integrity Implementation Startup Service"
Use of the ProCurve NAC requires that you already have a licensed version of
PCM+ 2.2 and IDM 2.2 installed.
The following section describes the support provided in PCM+ and IDM for
basic management and configuration functions on the ProCurve NAC. For
additional details on using the ProNAC endpoint integrity solution, please
refer to the online help in the ProNAC GUI, or the ProCurve Network Access
Controller 800 User’s Guide, available on the Web at:
www.procurve.com/
customercare/support/manuals.