HP Identity Driven Manager Software Series - Manual (Page 88)

3-20
Using Identity Driven Manager
Configuring Network Resources
Adding a Network Resource
To define a Network Resource:
1. Click the
Network Resources
node in the
Identity Management Configuration
navigation tree to display the
Network Resources
panel.
2. Click the
Add Network Resource
toolbar icon to display the
Define Network
Resource window.
Figure 3-14. Define Network Resource
3. Define the properties for the network resource.
Name Name used to identify the network resource
Description Brief description of the network resource (optional)
Resource Attributes:
IP Address: To filter by device address, uncheck the Any Address checkbox and
type the IP address for the switch associated with the resource in the
IP Address field.
Use the Any address option if you will be filtering by Protocol and
application port only, and not by specific device or port.
Mask: The subnet mask for the IP Address (if used). Use the up/down buttons
[ ▲, ▼ ] to set the mask number.
Table 3-2. IDM Network Resource parameters