HP Identity Driven Manager Software Series - Manual (Page 125)

3-57
Using Identity Driven Manager
Adding RADIUS Clients
3. If you want to restrict the user’s access to specific systems, click the
Systems tab to configure system permissions.
Otherwise click OK to save the user and close the window.
Configuring User Systems
1. To restrict the user’s access to specific systems, click the Systems tab.
Figure 3-42. User Systems tab display
You select from systems shown in the
All Systems
list, and click the >>
button to move them to the Allowed Systems list. The user will be restricted
to the selected systems.
2. To add a new user system click Add. to display the New User system dialog.
3. Enter the MAC Address of the system (in any format) from which the user
is allowed to login to the network, then click OK. The system information
is displayed in the New User window. If the user is allowed to login from
more than one system, repeat the process for each system.
4. When the User’s Systems are defined, click OK to save the new user
information and close the window. The new user appears in the Users List.
N O T E : Access Policy Group settings are not applied to the user until you deploy the
new configuration to the IDM Agent on the RADIUS server. See “Deploying
Configurations to the Agent” on page 3-46 for details.