HP Identity Driven Manager Software Series - Manual (Page 148)

4-4
Using the Secure Access Wizard
Using Secure Access Wizard
When you first open the wizard, the Load Settings and Load template buttons are
disabled. Once you have created and saved an access control configuration,
these buttons will be enabled.
2. Click Next to continue to the Device Selection window.
N o t e : If you do not have a licensed copy of the ProCurve Mobility Manager software
and there are wireless devices discovered by PCM, the Excluded Devices
window displays, with the list of devices, model, and installed switch software
version. Use the Device Capabilities link to determine if you can upgrade the
device software to a version that will support the secure access settings.
Figure 4-2. Secure Access Wizard, Device Selection example
3. The
Available Devices list is populated with all discovered ProCurve devices
that support use of 801.X Authentication. You can filter the list to display
devices for one device group (model) by selecting the device group from
the pull-down menu.
Select a device (or devices) in the Available devices list, then click >> to
move it to the Selected Devices list.