HP StorageWorks XP Remote Web Console Software - Manual (Page 98)

Table 53 ANTRQST Macro Command Parameters (Version 2)
Description Value Parameter Command
Specifies the device number
(device address) of the
S-VOL on which you want to
perform the FCESTABLISH
command. Source device number SDEVN REQUEST=FCESTABLISH
Specifies the device number
(device address) of the
T-VOL on which you want to
perform the FCESTABLISH
command. Target device number TDEVN
Establishes a relationship
including all the tracks in the
volume. If you specify YES
for this parameter and
COPY for the MODE
parameter, the relationship
will be maintained even after
the background copying
process is completed, and
the differential data between
the S-VOL and the T-VOL will
be managed. As long as the
relationship is maintained,
you cannot update the
T-VOL.
The differential data
between the S-VOL and the
T-VOL will be copied when
you execute the FCESTABL
command with
INCREMENTAL parameter
specified.
YES INCREMENTAL
The relationship will be
deleted after the background
copying process is
completed.
NO is the default setting.
NO
Specify this parameter to use
the Version 2 T-VOL as the
TrueCopy for Mainframe
M-VOL (or the Universal
Replicator for Mainframe
P-VOL). YES TGTPPRIM
Specify this parameter not to
use the Version 2 T-VOL as
the TrueCopy for Mainframe
M-VOL.
NO is the default setting.
NO
Obtains the return code and
the reason code of the
execution results. For details
about the codes, see the IBM
manual. Return value RETINFO
98 Performing Version 2 Operations