HP StorageWorks XP Remote Web Console Software User Manual
Page 100

Table 53 ANTRQST Macro Command Parameters (Version 2) (continued)
Description
Value
Parameter
Command
Suspends the write
operations from the host to
S-VOLs. To resume the write
operation, you need to issue
the FCWITHDRAW command
with the ACTION parameter.
However, if a timeout
occurs, the write operation
may be resumed although
you do not issue the
FCWITHDRAW
command.
The default setting of timeout
is 120 seconds (2 minutes),
but you may change it.
For detailed information
about changing the timeout
period, see
.
FREEZE
ACTION
REQUEST=FCESTABLISH
Specify the S-VOL and the
T-VOL of the relationship into
reverse.
•
If you specify YES for
INCREMENTAL, only the
updated part of the
S-VOL or the T-VOL of the
established relationship
will be copied.
•
If you specify NO for
INCREMENTAL or specify
nothing, only the copied
part from the S-VOL to the
T-VOL of the established
relationship will be
copied.
FRR
Specifies the device number
(device address) of the
T-VOL on which you want to
perform the FCESTABLISH
command. To specify this
number, use the TDEVN
parameter.
YES is the default setting.
YES
TGTUCB
Specifies the serial number,
the CU number, and the
LDEV number of the T-VOL
on which you want to
perform the FCESTABLISH
command. To specify this
number, use the TGTSERIAL,
TGTLSS, TGTDVC
parameters instead of
TDEVN.
NO
100 Performing Version 2 Operations