HP StorageWorks XP Remote Web Console Software - Manual (Page 125)

Command and Applicable Combinations” (page 125) describes the parameters of the FLASHCPY
WITHDRAW command and the applicable combinations.
Table 61 Parameters of FLASHCPY WITHDRAW Command and Applicable Combinations
Background Copying Parameter
Relationship after
Completion
Executed MODE TARGTVOL DDNAME, SYSNAME,
UNITADDRESS
Maintained when
CHANGERECORDING
= YES
Released when
CHANGERECORDING
= NO
Yes COPY T-VOL or some other
volume S-VOL
Released No NOCOPY or not
specified T-VOL S-VOL
Maintained when
CHANGERECORDING
= YES
Released when
CHANGERECORDING
= NO
Yes ALL T-VOL or some other
volume S-VOL
Released No ALL S-VOL or some other
volume T-VOL
The background copying process is executed on the relationship whose copy source exists in the
volume specified as DDNAME, SYSNAME, or UNITADDRESS. In addition, the relationship whose
copy source exists in the volume specified as DDNAME, SYSNAME, or UNITADDRESS will be
released.
Releasing a Version 2 Relationship Using the ANTRQST Macro Command
“Parameters for the ANTRQST Macro Command in Version 2” (page 125) lists the parameters you
can use with the ANTRQST Macro command when you release Version 2 relationships.
Table 62 Parameters for the ANTRQST Macro Command in Version 2
Description Value Parameter Command
Specifies the device number
(device address) of the
S-VOL on which you want to
perform the FCWITHDRAW
command. Source device number SDEVN REQUEST=FCWITHDRAW
Specifies the device number
(device address) of the
T-VOL on which you want to
perform the FCWITHDRAW
command. Target device number TDEVN
Specifies the number (device
address) of the device on
which you want to perform
the FCWITHDRAW command
with ACTION parameter. Device number DEVN
Releasing a Version 2 Relationship 125