HP StorageWorks XP Remote Web Console Software User Manual
Page 128
Table 63 Parameters for the FCQUERY Command (Version 2)
Description
Value
Parameter
Specify the number (device address) of
the Version 2 volume for which you
want to see the status.
Device number.
DEVN
Displays the relationship information.
If the SHOWRELS parameter is not
specified, NO is set by default.
NO
SHOWRELS
Displays all of the detailed relationship
information.
ALL
Specifies the number of relationships to
display.
Displays the specified number of
detailed relationship information.
The number of relationships
Specifies the CCHH number of the
starting address.
Use this parameter when the number of
relationships is specified in the
SHOWRELS parameter.
CCHH number
STARTADDR
The FCQUERY command can be used to display information, including the attributes set to the
devices specified by DEVN and the number of Version 2 relationships established with the specified
devices.
“FCQUERY Command Description” (page 128)
shows an example of the FCQUERY command. This
example requests the information on the device numbered 4202 to be displayed.
Figure 82 FCQUERY Command Description
FCQUERY DVEN(X'4202')
“FCQUERY Command Execution Result” (page 128)
shows the information displayed as a result of
executing the FCQUERY command described in
“FCQUERY Command Description” (page 128)
.
Definition of each displayed item is explained in
“Information Displayed by the FCQUERY Command
.
Figure 83 FCQUERY Command Execution Result
ANTF0090IF CQUERY Formatted
DEVN SSID LSS CCA CU SERIAL ACT MAX XC PC CC RV SE SEQNUM
4202 0102 02 02 2105 000000045029 1 1000 N N N N NN 00000000
“Information Displayed by the FCQUERY Command (Version 2)” (page 128)
shows the information
displayed by the FCQUERY Command (Version 2).
Table 64 Information Displayed by the FCQUERY Command (Version 2)
Definition
Displayed content
Displayed item
Device number recognized by the host
DEVN
Storage system number
SSID
CU number
LSS
Device number
CCA
128
Performing Version 2 Operations