Transparencies, Glossy paper and photo paper, Letterhead or preprinted forms – HP Color LaserJet CM1015CM1017 Multifunction Printer series User Manual
Page 30: Heavy paper

For instructions on loading labels, see
Load tray 1 (single-sheet feed tray)
.
Transparencies
●
Use only tray 1 or tray 2 to print on transparencies.
●
For tray, media orientation, and driver settings, see
.
●
Place transparencies on a flat surface after removing from the MFP.
●
Use only transparencies specified for use with HP Color LaserJet printers.
CAUTION
To avoid MFP damage, only use transparencies that are recommended for use in
Accessories and supplies information
Transparent print media not designed for LaserJet printing melts in the fuser, and damages the
fuser.
Glossy paper and photo paper
●
Handle glossy paper and HP LaserJet Photo paper by the edges.
●
For tray, media orientation, and driver settings, see
.
●
Use only glossy paper and photo paper specified for use with HP Color LaserJet printers.
Letterhead or preprinted forms
●
Avoid using raised or embossed letterhead.
●
Use only non-flammable inks that do not damage the print rollers.
●
For tray, media orientation, and driver settings, see
.
For instructions on loading letterhead, see
Load tray 1 (single-sheet feed tray)
.
Heavy paper
●
Do not use paper that is heavier than the recommended media specification for this MFP. See
●
For tray, media orientation, and driver settings, see
.
16
Chapter 2 Print media
ENWW