Use the control panel, Ip configuration, Manually configure a static ip address – HP Color LaserJet CM1015CM1017 Multifunction Printer series User Manual
Page 116
Use the control panel
●
●
●
●
Network configuration page
The Network configuration page lists the current network settings and other MFP properties. To print
the Network configuration page from the MFP:
1.
On the control panel, press
Menu
.
2.
Press the navigation arrows to select Reports, then press
OK
.
3.
Press the navigation arrows to select Network report, then press
OK
.
Configuration page
The Configuration page lists the current MFP settings and properties. It is possible to print a
Configuration page from the MFP or HP ToolboxFX. To print the Configuration page from the MFP:
1.
On the control panel, press
Menu
.
2.
Press the navigation arrows to select Reports, then press
OK
.
3.
Press the navigation arrows to select Configuration report, then press
OK
.
IP configuration
It is possible to configure the IP address manually or automatically.
Manually configure a static IP address
CAUTION
Do not assign identical TCP/IP addresses to two network devices on the same
network.
To manually configure a static IP address from the control panel:
1.
On the control panel, press
Menu
2.
Press the navigation arrows to select Network config.
3.
Press
OK
.
4.
Press the navigation arrows to select the TCP/IP configuration menu.
5.
Press
OK
.
6.
Press the navigation arrows to select Manual.
7.
Press and hold
OK
.
8.
Press
Left arrow
or
Right arrow
to decrement or increment each triplet value.
102
Chapter 11 Network Setup and Administration (HP Color LaserJet CM1017 MFP)
ENWW