HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 118)

NOTE The setting must match with the network device to which you are connecting (a
network hub, switch, gateway, or computer).
5. Press OK . The MFP may power cycle.
Supported network protocols
This table lists the networking services/protocols supported on the HP Color LaserJet CM1017 MFP.
Table 11-1 Printing
Service name Description
port9100 (Direct Mode) Printing service
Line printer daemon (LPD) Printing service
Table 11-2 Network device discovery
Service name Description
SLP (Service Location Protocol) Device Discovery Protocol, used to help find and configure
network devices. Used primarily by Microsoft based
applications.
Bonjour, (commonly referred to as Rendezvous or mDNS
(multicast Domain Name Service)) Device Discovery Protocol, used to help find and configure
network devices. Used primarily by Apple Macintosh based
Applications. For more information, see
Software for
Macintosh .
Table 11-3 Messaging and management
Service name Description
HTTP (Hyper Text Transfer Protocol) Allows web browsers to communicate with embedded Web
server.
SNMP (Simple Network Management Protocol) Used by network applications for device management. SNMP
v1 and standard MIB-II (Management Information Base)
objects are supported.
Table 11-4 IP addressing
Service name Description
DHCP (Dynamic Host Configuration Protocol) For Automatic IP address assignment. DHCP server provides
device with IP address. Generally requires no user intervention
for MFP to obtain IP address from a DHCP server.
BOOTP (Bootstrap Protocol) For Automatic IP address assignment. BOOTP server
provides device with IP address. Requires administrator to
input devices MAC hardware address on BOOTP server in
order for MFP to obtain an IP address from that server.
Auto IP For Automatic IP address assignment. If neither a DHCP
server nor a BOOTP server is present, this service allows the
104 Chapter 11 Network Setup and Administration (HP Color LaserJet CM1017 MFP) ENWW