HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 132)

Menu Item Sub-menu item Sub-menu item Description
Press OK to select the default
setting.
Select Override to print
on a different size paper
after a specified delay.
Select Cancel job to
automatically cancel the
print job after a specified
delay.
If either Override or
Cancel job is chosen,
the control panel
prompts for the number
of seconds to delay.
Press the
Right arrow to
increase the time up to
3600 seconds. Press
Left arrow to decrease
the time.
Print quality
Calibrate color Calibrate now
Power-on calibration
Calibrate now: Directs the
printer to immediately
calibrate. When a job is
processing, the printer
calibrates after the job is
complete. When an error
message displays, clear the
error before continuing.
Power-on calibration: Select
how quickly the printer should
calibrate after it is powered
on. The default setting is 15
minutes.
Cartridge low Signals that the cartridge is
almost empty.
Replace supplies Displays message that a
supply or supplies need to be
replaced.
Courier font Select courier font values.
Table 12-5 Service Menu
Menu item Description
Cleaning mode This options cleans the printer when specks or other marks
appear on printed output. The cleaning process removes dust
and excess toner from the paper path.
When selected, the printer prompts to load plain paper in tray
1 and then press
OK to begin the cleaning process. Wait until
the process completes. Discard the page that prints.
Restore defaults Sets all customized settings to the factory default values.
Table 12-4 System Setup Menu (continued)
118 Chapter 12 How do I? ENWW