HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 27)

Table 2-1 Tray specifications
Media Type Dimensions 1 Weight Capacity 2
Paper Minimum: 76 x 127 mm
(3 x 5 inches) 60 to 163 g/m 2 (16 to 43 lb)
Up to 176 g/m 2 (47 lb) for
postcards
Tray 1: Single sheet of paper
Tray 2: Up to 250 sheets
Tray 3 (optional): Up to 250 sheets
NOTE Tray 3 does not
accept postcards,
envelopes, or other special
media.
Maximum: 216 x 356 mm
(8.5 x 14 inches)
HP LaserJet glossy paper and
HP LaserJet Photo paper
4
Identical to Paper 75 to 220 g/m 2 (20 to 58 lb) Tray 1: Single sheet of HP LaserJet
glossy paper or HP LaserJet Photo
paper
Tray 2: Up to 25 mm (0.99 inch)
stack height
HP Premium Cover paper 4 Identical to Paper 200 g/m 2 (53 lb) cover Tray 1: Single sheet of HP Cover
paper
Tray 2: Up to 25 mm (0.99 inch)
stack height
Transparencies and opaque
film Identical to Paper Thickness: 0.10 to 0.13 mm (3.9
to 5.1 mils) Tray 1: Single sheet of
transparency or opaque film
Tray 2: Up to 50 sheets for tray 2
Labels 3 Identical to Paper Thickness: up to 0.23 mm (up to
9 mils) Tray 1: Single sheet of labels
Tray 2: Up to 25 mm (0.99 inch)
stack height
Envelopes Up to 90 g/m 2 (up to 24 lb) Tray 1: Single envelope
Tray 2: Up to ten envelopes
1 The MFP supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2 Capacity can vary depending on media weight and thickness, and environmental conditions.
3 Smoothness: 100 to 250 (Sheffield).
4 Hewlett-Packard does not guarantee results when printing with other types of heavy paper.
ENWW Media supported on this MFP 13