Clean the paper path, Calibrate the mfp, Clean the paper path calibrate the mfp – HP Color LaserJet CM1015CM1017 Multifunction Printer series User Manual
Page 217

To restore the factory-set defaults
1.
Press
Menu
.
2.
Press the navigation arrows to select Service, then press
OK
.
3.
Press the navigation arrows to select Restore defaults, then press
OK
.
The MFP automatically restarts.
Clean the paper path
The MFP features a special cleaning mode to clean the paper path.
NOTE
If you have access to HP ToolboxFX, HP recommends cleaning the paper path by
using HP ToolboxFX.
To clean the paper path
1.
Press
Menu
.
2.
Press the navigation arrows to select Service, then press
OK
.
3.
Press the navigation arrows to select Cleaning mode, then press
OK
.
A page feeds slowly through the MFP. Discard the page when the process is completed.
4.
Load plain letter or A4 paper when prompted.
5.
Press
OK
again to confirm and begin the cleaning process.
A page feeds through the MFP slowly. Discard the page when the process is completed.
Calibrate the MFP
Calibrations are performed at regular intervals. For best print quality, a calibration can be performed
from the control panel. For more information about calibrating the MFP, see
ENWW
Additional problem solving tools
203