Table c-5 environmental specifications – HP Color LaserJet CM1015CM1017 Multifunction Printer series User Manual
Page 243

Table C-4
Power consumption (average, in watts)
Product
model
Printing (Color)
Printing (Black and
White)
Copying
Ready
Power Save Off
HP Color
LaserJet
CM1015 MFP
200 W
190 W
150 W
18 W
18 W
0 W
HP Color
LaserJet
CM1017 MFP
200 W
190 W
150 W
18 W
18 W
0 W
1
Values subject to change, s
for current information.
2
Power reported is highest values measured for color and monochrome printing/copying using all standard voltages.
3
Default time from Ready Mode to Power Save = 0 minutes.
4
Recovery time from Power Save to start of printing = 14 seconds
5
Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour
6
HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
WARNING!
Power requirements are based on the country/region where the MFP is sold. Do
not convert operating voltages. This can damage the MFP and void the product warranty.
Table C-5
Environmental specifications
Recommended
Operating
Storage
(MFP and print cartridge)
Temperature
20° to 27°C (68° to 81°F)
15° to 32.5°C (59° to 90.5°F)
-20° to 40°C (-4° to 104°F)
Relative humidity
20% to 70%
10% to 80%
95% or less
1
Values are subject to change. Se
for current information.
Table C-6
Acoustic emissions
Sound Power Level
Declared Per ISO 9296
Printing/Copying (8 PPM)
Ready
L
WAd
= 5.8 Bels (A) [58 dB (A)]
Inaudible
Sound Pressure Level (SPL)-Bystander Position
Declared Per ISO 9296
Printing/Copying (8 PPM)
Ready
L
pAm
= 46 dB(A)
Inaudible
1
Values are subject to change. Se
for current information.
2
Configuration tested: HP Color LaserJet CM1017 MFP, continuous monochrome printing on A4 paper at 8 PPM.
3
HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
Table C-7
Paper and print media support specifications table
Category
Specifications
Acid content
5.5 pH to 8.0 pH
Caliper
0.094 to 0.18 mm (3.0 to 7.0 mils)
ENWW
Multifunction peripheral (MFP) specifications
229