HP Deskjet D4363 Printer - Manual (Page 73)

Print cartridge storage and handling
Follow these guidelines to help maintain HP print cartridges and ensure consistent print
quality:
•
When you remove a photo print cartridge from the printer, store it in a print cartridge
protector to prevent the ink from drying out. If you do not have a print cartridge
protector, you can use an airtight plastic container to protect your print cartridge. For
more information, see
Print cartridge protector .
• Keep all unused print cartridges in their original sealed packages until they are
needed. Store print cartridges at room temperature (15° to 35° C or 59° to 95° F).
• Do not remove the plastic tape covering the ink nozzles until you are ready to install
the print cartridge in the printer. If the plastic tape has been removed from the print
cartridge, do not attempt to reattach it. Reattaching the tape damages the print
cartridge.
CAUTION: Always turn the printer off with the Power button before you unplug the
power cord or turn off a power strip. This allows the printer to store the print cartridges
properly. When you store the printer, always leave the active print cartridges inside
the printer.
Print cartridge protector
If you have purchased an HP photo print cartridge, you can store it in the protector that
comes with the print cartridge. If you do not have a print cartridge protector, you can use
an airtight plastic container to protect your print cartridge.
To insert the print cartridge into the print cartridge protector
▲ Slide the print cartridge at a slight angle into the protector, and snap it securely in
place.
Chapter 10
70 Maintenance
Mainte
nance