Print hagaki cards, Hagaki cards – HP Deskjet D4363 Printer User Manual

Page 42

Print
1. Open the

Printer Properties dialog box

2. Click the Features tab, and then specify the following print settings:

•

Paper Type: Click More, click Specialty Papers, and then select an appropriate
card type.

•

Print Quality: Normal or Best

•

Size: An appropriate card size

3. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that appear in the Printer
Properties dialog box. For more information, see

What's This? help

NOTE:

For information on resolving an out-of-paper message, see

Out of paper

Print hagaki cards

(Japan only)

Guidelines
Do not exceed the input tray capacity: 30 hagaki cards

Prepare to print
1. Raise the output tray, and then remove all paper from the input tray.
2. Slide the paper guide all the way to the left.
3. Place the cards in the right side of the input tray. The side to be printed on should

face down and the short edge should point toward the printer.

4. Push the cards into the printer until they stop.
5. Slide the paper guide firmly against the edge of the cards.