HP Hitachi Dynamic Link Manager Software - Manual (Page 66)

firewall_setup command syntax
The firewall_setup command registers ports used by Hitachi Command
Suite Common Agent Component into the exceptions list of Windows Firewall
running on the remote management client.
The firewall_setup command is stored in the following location, depending
on whether the Device Manager agent is installed.
• Device Manager agent is installed:
program-installation-destination-drive:\Program Files
# \Hitachi
\HDVM\HBaseAgent\bin\firewall_setup.bat
• Device Manager agent is not installed:
program-installation-destination-drive:\Program Files
# \HDVM
\HBaseAgent\bin\firewall_setup.bat
#
For Windows 7 (x64) , Windows Server 2008, and Windows Vista (x64),
Program Files is Program Files (x86).
The following table describes the firewall_setup command syntax.
Table 3-3 firewall_setup command syntax
Item Details
Synopsis firewall_setup {-set|-unset}
Description Registers the ports used by Hitachi Command Suite Common Agent
Component into the Windows Firewall exceptions list.
•
Port set for the server.agent.port property (default: 24041/
tcp)
• Port set for the server.http.port property (default: 24042/
tcp)
• Port set for the server.http.localPort property (default:
24043/tcp)
When executing the command, log on as a member of the
Administrators group and execute the command from the
Administrator: Command Prompt window.
Options -set
Adds firewall exceptions.
-unset
Removes firewall exceptions.
Note:
The folder that stores the Hitachi Command Suite Common Agent
Component commands is automatically added to the PATH environment
variable of the remote management client. So, when executing the
3-14
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for VMware ®