HP Hitachi Dynamic Link Manager Software - Manual (Page 187)

Message ID Message Text Explanation
file has been inadvertently
deleted.
KAPL04009-E The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then check
the option settings.
Use the dlnkmgr set operation to
return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-install
HDLM. For details on the view
operation, see view (Displays
Information) on page 6-24 . For
details on the set operation, see
set (Sets Up the Operating
Environment) on page 6-15 .
KAPL04010-E Could not open the error log file. Details
HDLM manager could not start
normally because it was unable to
open the error log file.
Action
Check whether another program is
currently using the error log file
(for example, the file is being
opened in a text editor), or
whether the error log file has been
inadvertently deleted.
KAPL04011-E Could not output the error log
file.
Details
The log information could not be
output to the error log file.
Action
Make sure that the disk has
enough unused capacity.
KAPL04012-E Could not create a
communication pipe. RC =
aa...aa
Details
HDLM manager could not start
normally because it was unable to
create a pipe file, which is used in
communication with HDLM
commands.
Messages
8-29
Hitachi Dynamic Link Manager User Guide for VMware ®