HP Hitachi Dynamic Link Manager Software - Manual (Page 107)

dlnkmgr [Host-Connection-Options] online [-path]
-hbaportwwn HBA_Port_WWN [-s]
dlnkmgr [Host-Connection-Options] online [-path] -hapath
[-lu -pathid AutoPATH_ID] [-s]
dlnkmgr [Host-Connection-Options] online [-path] -dfha [-
lu -pathid AutoPATH_ID] [-s]
Host-Connection-Options:
[ -a | --passthroughauth ]
[ -c CONFIG | --config=CONFIG ]
[ -f SESSIONFILE | --sessionfile=SESSIONFILE ]
[ -h VIHOST | --vihost=VIHOST ]
[ -p PASSWORD | --password=PASSWORD ]
[ -r URL | --url=URL ]
[ -s SERVER | --server=SERVER ]
[ -t CACERTSFILE | --cacertsfile=CACERTSFILE ]
[ -u USERNAME | --username=USERNAME ]
[ --credstore=CREDSTORE ]
[ --passthroughauthpackage=PASSTHROUGHAUTHPACKAGE ]
[ --portnumber=PORTNUMBER ]
[ --protocol=PROTOCOL ]
[ --savesessionfile=SAVESESSIONFILE ]
[ --servicepath=SERVICEPATH ]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
KAPL01001-I The HDLM command completed normally. Operation
name = online, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Reference
Using the view operation together with standard OS commands enables you
to filter the path information listed for a specific CHA port. For details about
the view operation, see view (Displays Information) on page 6-24 .
We recommend that you use the following command and verify the
information on the target paths before you execute the online operation to
place online all the paths connected to a specific CHA port.
Example
The following example shows how to filter and display the information on
all paths that pass through the CHA port 0A of the Hitachi AMS series:
dlnkmgr view -path -stname | find "AMS" | find "0A"
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Command Reference
6-15
Hitachi Dynamic Link Manager User Guide for VMware ®