HP Hitachi Dynamic Link Manager Software - Manual (Page 124)

KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display path information
When displaying path information, if you specify either the -item or -c
parameter and also specify the -path parameter, you can select the items to
display and display a summary of path information. This section describes
each parameter, path information and displayed items.
To display path information
-path
When you specify the -path parameter and do not specify either the -c or
-item parameter, the information will be displayed about the HDLM
managed paths without abbreviating or selecting items.
In the sub-parameters (following -path), you can filter the paths to be
listed using -hdev and sort the list using -srt. When you omit both
parameters, the command displays information for all the paths in order
of increasing AutoPATH_IDs.
For details on what is displayed in each item, see
Table 6-9 Path
Information on page 6-37 .
AutoPATH_IDs displayed by the -path parameter depend on the sequence
in which HDLM detects the paths after a host is started up. Because of
this, make sure that you use the path name PathName to identify a path.
The sub-parameters are as follows:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
The host-device-name string is case-sensitive.
-stname
Use this parameter to display the model ID of the storage system in
the product ID element of the DskName field. When this parameter is
omitted, the command displays the product ID or emulation type of
the storage system instead.
For details about the information displayed for product IDs, see
Table
6-11 Product ID displayed by the view -path operation on page 6-42 .
-iem
Use this parameter to add IEP to path information and display
information about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting keys.
6-32
Command Reference
Hitachi Dynamic Link Manager User Guide for VMware ®